Tuning your own piano

How to tune a piano

You need a tuning lever, mutes and a tuner. Tune the octave around middle C first, then octaves outward to both ends, then the unisons. Allow several hours the first time, and know which jobs to leave to a technician.

What you need

Three tools, all inexpensive. The lever is the one worth buying well.

  • A tuning lever. Also called a tuning hammer: a handle with a socket that fits the tuning pins. Most pianos take a No. 2 star tip. Pliers or a wrench will round the pins off; don’t use them.
  • Mutes. A long felt strip for the middle of the piano, and two or three rubber wedges. They silence the strings you aren’t tuning, so you hear one string at a time.
  • A tuner. A tuning fork (A440) if you tune by ear, or an electronic tuner made for pianos. A guitar tuner won’t do: a piano’s octaves are tuned slightly wide, and a tuner has to know how much.

The steps, in order

Tune from the middle outward. The middle is where you hear intervals most clearly, and it sets the reference every other note is tuned against.

  1. Mute the middle section

    Most notes have three strings. Press the felt strip between the strings of the middle two octaves so only the center string of each note sounds.

  2. Set A4 to pitch

    Tune the A above middle C to 440 Hz, the standard. If the whole piano is far flat, see “If the piano is a long way flat” below before you start.

  3. Tune the temperament

    Tune the notes around middle C, about an octave, so every interval between them is evenly spaced (equal temperament). This octave is the reference the rest of the piano is tuned from, so take the most care here.

  4. Tune octaves outward

    Work up the treble and down the bass, tuning each note to the octave below or above it. Octaves are tuned a little wider than exact, more so toward the ends of the keyboard, because piano strings are stiff and their overtones run sharp (inharmonicity).

  5. Tune the unisons

    Pull the felt strip a few notes at a time and tune the outer strings of each note to its center string, until the note sounds as one clean string with no beating.

  6. Check and touch up

    Play octaves, chords and the music you play. Notes tuned early can move as tension changes elsewhere; touch those up last.

Turning the pin: the part that takes practice

Pin setting is what separates a tuning that holds from one that drifts by the next day. Turn the lever in very small moves; the pin barely rotates, and the string twists in the pinblock before it moves. Bring the note up to pitch from slightly flat, then ease the lever back a touch so the pin settles without the note dropping. Strike the key firmly a few times: if the note moves, set it again. Always approach pitch from below: a string pulled sharp and let down tends to creep back up.

If the piano is a long way flat

A piano that hasn’t been tuned for years is often well below 440 Hz. Raising it in one pass doesn’t hold: as you add tension to later notes, the soundboard and frame give a little and the notes you tuned first go flat again. Technicians do a quick first pass that deliberately overshoots each note (overpull), then a fine tuning. If the piano is more than about a semitone flat, the strings are old, or it hasn’t been tuned in a decade, call a technician: the risk of a broken string rises with the raise.

When to call a technician

  • A pin turns too easily and won’t hold the note (loose pins or a cracked pinblock).
  • A string breaks, or is rusted where it wraps the pin.
  • Keys stick, repeat badly or don’t return: that’s regulation, not tuning.
  • The piano needs a large pitch raise, or it’s a valuable instrument.

Tuning with an app

An electronic tuner replaces the tuning fork and most of the listening. A piano tuner has to know how far to stretch this piano’s octaves; Agraffe Piano Tuner measures that from the strings themselves as you play the first few keys, follows whichever key you strike with nothing to tap, and shows which way to turn and when the note is in tune. The app’s own four-step guide shows how it fits these steps. Technicians weighing tuning apps can compare them here.

Questions

Can you tune a piano yourself?

Yes. The method is learnable and the tools cost little. What takes practice is moving the pin in small, controlled turns and setting it so the string stays where you left it. Expect your first tuning to be slower and less stable than a technician’s, and expect it to get better each time.

How hard is it to tune a piano?

Hearing whether a string is sharp or flat is the easy part, and a tuner does it for you. The hard parts are the lever technique (pin setting), keeping the octaves balanced across the whole keyboard, and clean unisons. A piano that has dropped a long way flat is hard even for professionals.

How long does it take to tune a piano?

A technician usually takes an hour to an hour and a half. A first-timer should allow several hours, and it’s fine to tune the middle and treble one day and the bass the next.

How often should a piano be tuned?

At least once a year, and more often for a new piano, one that has just been moved, or one in a room whose humidity swings with the seasons.

Is an upright tuned differently from a grand?

The method is the same. On an upright the pins are at the top, behind the lid and the front panel; on a grand they’re under the music desk, nearest the keys. Mutes go between the strings in both.

Can you tune a piano with a phone app?

Yes, if the app is made for pianos: it has to build a stretch curve for the piano it hears rather than tune every note to a fixed table. Agraffe Piano Tuner does that from the first few keys you play, and shows which way to turn each string and when to stop.